Tensile - Technical Papers

The Effect of Microstructure and Pore Morephology on Mechanical and Dynamic Properties of Ferrous P/M Materials (#69)
Performance Characteristics of a New Water-Atomized Prealloyed Powder (0.5 weight % Molybdenum (#68)
A Comparison of ANCORDENSE Processed Materials with Malleable Cast Iron (#67)
A Superior Sinter-Hardenable Material (#66)
Ancorloy Mixes: Binder Treated Analogs of the Diffusion Alloyed Steels (#65)
Application of High Performance Materials and Processes - Alloy Systems(#60)
The Effect of Service Temperature on the Properties of Ferritic Stainless Steels(#55)
Sinter-Hardening P/M Steels(#54)
The Application of Warm Compaction to High Density Powder Metallurgy Parts(#53)
The Effect of Microstructure on Fatigue Properties of Ferrous P/M Materials(#52)
Effect of Process Conditions Upon Sinter-Hardening Response of FLC-4608 Materials(#50) NA
The Effect of Nickel Content, Sintering Temperature, and Density on the Properties of a 0.85 w/o Molybdenum Prealloy(#49)
The Development of High Performance P/M Steels(#45)
Single Compaction to Achieve High Density in Ferrous P/M Materials in Automotive Applications(#43)
The Effect of Microstructure on Fatigue Properties of High Density Ferrous Materials(#42)
Properties of Several ANCORDENSE Processed High Performance Materials(#41)
An Investigation Into the Effects of Processing Methods on the Mechanical Characteristics of High Performance Ferrous P/M Materials(#33)
Properties of Diffusion Bonded Alloys Processed to High Densities(#32)
Advanced Properties of High Density Ferrous Powder Metallurgy Materials(#31)
Recent Developments in Ferrous Powder Metallurgy Alloys(#27)
High Performance Ferrous P/M Materials For Automotive Applications(#26)
Properties of High Density Ferrous P/M Materials, A Study of Various Processes(#24)
High Density Processing of High Performance Ferrous Materials(#23)
High Density Processing of CR-Mn P/M Steels(#22)
Properties of Heat Treated P/M Alloy Steels(#18)
Sinter-Hardening Low-Alloy Steels(#17)
High Performance Ferrous P/M Materials Utilizing High Temperature Sintering(#16)
Surface-Hardenable Heat Treated P/M Steels(#15)
Improved Dimensional Control and Elimination of Heat Treatment for Automotive Parts(#12)
Tensile, Impact and Fatigue Performance of New Water ATomized Low-Alloy Powder - Ancorsteel 85 HP(#11)
High Performance Ferrous P/M Materials: The Effect of Alloying Method on Dynamic Properties(#7)
Ferrous Powders - How Alloying Method Influences Sintering (#4)
Fatigue Properties of P/M Materials (#3)
Impact and Fatigue Characterization of Selected Ferrous P/M Materials (#1)

Return to by Category Page

Home | Structural Parts | Chemical | Atomized Unalloyed Steel | Atomized Low Alloyed Steel | Public Technical Seminars | MPIF Conference | SAE | Press Releases | Technical Library by Topic | F.A.Q. 

© 2008 Hoeganaes Corporation. All Rights Reserved.

1001 Taylors Lane • Cinnaminson, NJ 08077-2017 • USA • 856-829-2220