Atomized Low Alloy Molybdenum Metal Powders
Ancorsteel® 30 HP: Is a new water atomized, prealloyed low-alloy metal powder for high performance applications. The prealloyed 0.35 weight % (w/o) molybdenum addition results in moderate hardenability, suitable for heat treated applications. Ancorsteel 30 HP provides a cost effective complement to other molydenum prealloyed low-alloy steels.
Ancorsteel® 50 HP: Is a new water atomized, prealloyed low-alloy metal powder for high performance applications. The prealloyed 0.50 weight % (w/o) molybdenum addition results in high compressibility and provides good response to heat treatment. Ancorsteel 50 HP complements other prealloyed powders in which molybdenum is used as the principal alloying addition; Ancorsteel 85 HP (0.85 w/o Mo) and Ancorsteel 150 HP (1.5 w/o Mo). Ancorsteel 50 HP is an ideal base powder for a wide range of nickel-copper and chromiummanganese hybrid alloy systems.
Ancorsteel® 85 HP: Is a water atomized, prealloyed low-alloy metal powder for high performance applications. The prealloyed powder 0.85 w/o molybdenum addition allows exceptionally high compressibility and provides good response to heat treatment. Ancorsteel 85 HP is a good base powder for a wide range of hybrid alloy systems.
Ancorsteel® 150 HP: Is a water atomized low-alloy metal powder for high performance applications. The prealloyed 1.5 w/o molybdenum addition permits extremely good compressibility and provides good response to heat treatment. Ancorsteel 150 HP is a good base powder for a wide range of hybrid alloy systems.
Ancorsteel® 2000: Is a water atomized low-alloy powder metal containing nickel, molybdenum, and manganese which satisfies Metal Powder Industries Federation (MPIF) material specification FL-4200. Ancorsteel 2000 is particularly useful for conventional P/M parts requiring greater hardenability than is possible when using admixed or diffusion alloyed powders. It has good compressibility and green strength, enabling parts to be made easily to densities above 6.7 g/cm3. The use of nickel and molybdenum as the principal alloying elements permits Ancorsteel 2000 to be processed using conventional P/M sintering temperatures and atmospheres. Ancorsteel 2000, because of its high degree of cleanliness and uniform chemistry, is ideally suited for iron powder forging (P/F) applications that require the hardenability and mechanical properties associated with cast and wrought steels. Part densities of 7.60 to 7.86 g/cm3 can be obtained using hot forming pressures of 415–1100 MPa (30–80 tsi).
Ancorsteel® 4600V: Is a water atomized low alloy metal powder containing nickel, molybdenum, and manganese which satisfies Metal Powder Industries Federation (MPIF) material specification FL-4600. Ancorsteel 4600V is particularly useful for conventional P/M parts requiring greater hardenability than is possible when using admixed or diffusion alloyed powders. It has good compressibility and green strength, enabling parts to be made easily to densities above 6.7 g/cm3. The use of nickel and molybdenum as the principal alloying elements permits Ancorsteel 4600V to be processed using conventional P/M, temperatures and atmospheres. Ancorsteel 4600V, because of its high degree of cleanliness and uniform chemistry, is ideally suited for powder forging (P/F) applications that require the hardenability and mechanical properties associated with cast and wrought steels. Part densities of 7.60 to 7.86 g/cm3 can be obtained using hot forming pressures of 415–1100 MPa (30–80 tsi).